McCON NEL
Connect the hydraulic service pipes (of the tool) to the machine's quick couplings on the right-hand
8.
side, taking care to clean them before making the connection.
•
The outermost couplings are used for the auxiliary function (AUX 1).
•
The innermost couplings are used for the auxiliary function (AUX 2).
6.3.13 - OPERATING THE TOOL
The tool's hydraulic motor is enabled by the switch (5) and controlled by the potentiometer (11).
Follow the instructions below to start it.
•
Then, enable and select the rotation of the tool's hydraulic motor using the switch (5). To move
the tool, gradually turn the potentiometer (11) clockwise. When the tool starts to move, increase
the hydraulic engine rpm by turning the potentiometer to 100%.
•
Now, you can increase the rpm of the engine until you reach the desired working speed by
pressing the button (14A).
14
A
AUX 2
AUX 1
49
5
11