Table of Contents
Advertisement
Available languages
Available languages
RIMINI DP
When Adaptive Start is running the emitter progressively increases the set-point temperature
until the next programmed set point is reached.
* This function is considered by Directive 2009/125/EC regulations and will give the unit
more efficiency during operation.
5.9. Keyboard lock
The user can lock the keyboard by touching and holding the
and
keys for 2.5 seconds.
The un-lock is performed in the same way. When the touchpad is unlocked or locked, the
screens are displayed:
This is possible in all modes of operation except in Configuration. The emitter can be also
locked when is on Standby.
When the emitter is locked, the padlock icon will appear in the upper left area of the screen:
5.10. Remote control
Optionally you can purchase the Remote control for easy management of the emitter.
With it you can perform the common functions: switch the emitter between Standby and Opera-
tional, select the operating mode, set temperatures (it supports increasing or decreasing press-
ing and holding the button), exit the open windows function, edit day, time, and program, and
configure, set and remove the manual mode.
You cannot lock / unlock the touchpad, activate / deactivate the evanescent function, enable /
disable the evanescent function, access the date, time, and program edition nor (once accessed
the edition from the emitter panel) copy the program from one day
to the next or exit the edition in the middle of programming with the
remote control.
EN
A73021553
65
Advertisement
Chapters
Table of Contents
