Advertisement
Quick Links
Advertisement
Related Manuals for MIRABELLA I004775
Summary of Contents for MIRABELLA I004775
- Page 1 Quick Start Guide Wi-Fi Smart Pan&Tilt Camera Model I004775 KEYCODE: 43274604...
-
Page 2: Package Contents
Package contents camera USB cable adapter screw package... - Page 3 Description Micro SD socket Reset port 1.Micro SD card slot (for local storage, max.128GB) 2.Indicator light 3.Camera lens 4.Reset: Press and hold the ‘reset’ for 5 seconds to reset the device 5.Speaker 6.Power: Type-C USB (DC 5V/1A) 7.Hole for wall hanging 8.1/4”...
- Page 4 Wi-Fi extender to boost the Wi-Fi signal strength. Install the Mirabella APP and register Account To access your camera and it’s functions download the "Mirabella Genio" APP to your smartphone from the App Store or Google Play then add your device to the APP.
- Page 5 Insert a Micro SD card Please note that the camera will work without an SD card, but it will not be able to record any footage. Insert the Micro SD card gently into the SD card slot. Please pay attention to the direction of the Micro SD card.
- Page 6 2.Check your mobile phone is connected to the 2.4Ghz Wi-Fi network, (Wi-Fi name should not end with -5G). 3.Open the Mirabella Genio APP, tap on blue “+” icon, then choose add device, then select Security & Sensor and select your camera from the list.
- Page 7 4.Confirm that the LED indicator light is still blinking rapidly blue, tap “confirm Indicator is blinking BLUE rapidly”, then tap “next” and enter your home network 2.4GHz Wi-Fi name and password. Tap next and the QR code will appear on your phone screen, place this QR code in front of the camera at approximate 15-20cm, until you hear a sound, example of how to scan QR code QR code is the code on your phone screen,...
- Page 8 Tap on “Beeped/ Indicator switched” It will then start to connect your device. (refer to the 1st & 2nd images). 5. Once the countdown ends, the Camera has now successfully been paired to your APP. Please refer to the FAQ section for troubleshooting if this method does not connect. if somehow the QR code method does not work , please reset and retry using the EZ method.
- Page 9 Q. LED indicator is not blinking rapidly as per APP screen A. Power off the camera, wait for 20 sec, depress the reset button until you hear a sound, then release the button, wait for another 30-40 sec until the light starts to blink blue rapidly again (1 blink every second).
- Page 10 On the Genio APP home screen, Tap on Me -> Settings -> App Notification -> turn on/off Enable notifications. On the iphone, Settings -> Notifications -> turn on/off Allow Notifications for the Mirabella Genio app. For multiple camera setup, change camera view or arrange device set up sequences and manage rooms.
- Page 11 Need more help or need further technical assistance from Mirabella engineer On the genio APP home screen, tap on, Me, -> FAQ & Feedback -> Report issue Fill the fault information or suggestion for the APP/product, then submit please detail the problem in here...
- Page 12 All trademarks are used for reference purposes only. Made in China ANKO, HOME&CO AND AUDIOSONIC® ARE TRADEMARKS OF KMART AUSTRLIA LIMITED. MIRABELLA INTERNATIONAL PTY LTD 1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043 TOLL FREE: 1800 636 528, www.mirabellagenio.com.au...
Need help?
Do you have a question about the I004775 and is the answer not in the manual?
Questions and answers