Related Manuals for MIRABELLA Speed 14S
Summary of Contents for MIRABELLA Speed 14S
- Page 1 Quick Start Guide FULL HD P &T Indoor Wi-Fi Camera Model: Speed 14S KEYCODE: I003969 v.2.0.0 26/03/2021 P a g e...
- Page 2 Welcome, Thank you for choosing our smart camera, getting started is easy What’s included Speed 14S Bracket Screws Adaptor Product Details 1. Connection Preparation It is important that your phone is connected to the 2.4Ghz Wi-Fi and not to the 5GHz network.
- Page 3 Wi-Fi extender to boost the Wi-Fi signal strength. 2. Install the APP and register Account For the best experience, download the "Mirabella Genio" APP to your smartphone from the App Store or Google Play. 3. Insert the Micro SD card (Please note that the camera will work without an SD card, but it will not be able to record any footage.)
- Page 4 (if light is slowly blinking1 blink every 2 seconds please reset it ) 3. Open the Mirabella Genio APP, tap on +, then choose Security & Sensor and select your camera from the list...
- Page 5 4. Double check and ensure that the LED indicator light is still blinking red rapidly, tap confirm blinking Fast and enter your 2.4GHz Wi-Fi name and password, then next 5. Tap continue and a QR code will appear on your phone screen, place this QR code in front of the camera at approximate 15-20cm (photo shown below), until you hear a sound, the indicator light will now change from red to blue.
- Page 6 example of how to scan QR code QR code is the code on the phone screen, not the barcode on the camera box 6. Camera is now successfully added into your APP. Please refer to the FAQ section for troubleshooting if this method does not connect. Camera usage Tips (user interface may change with APP updates) Tap on the pencil icon or …...
- Page 7 To switch to full screen view mode : Wi-Fi signal, if signal is less than 60% you should consider changing the location or boost the Wi-Fi Signal using Wi-Fi extender Device Name: You can customize the camera name here Share Device, If you wish to share or remove this camera with other genio APP user Device information: Detail information for this camera, owner information, Virtual ID, IP address etc...
- Page 8 1. On the Genio APP home screen, Tap on Me -> Settings -> Push Notification -> turn on/off Enable notifications 2. On the iphone, Settings -> Notifications -> turn on/off Allow Notification MIRABELLA INTERNATIONAL PTY LTD 1 MIRABELLA DRIVE, TULLMARINE, VIC, AUSTRALIA 3043 TOLL FREE: 1800 636 528, www.mirabellagenio.com.au P a g e...
Need help?
Do you have a question about the Speed 14S and is the answer not in the manual?
Questions and answers