Download Print this page

Wiseup W70 User Manual

Waterproof wristwatch

Model Number: W70 / W71

I. Product Overview

1. Week Day

2. RESET Button

3. Hour

4. PM Indicator

5. MODE Button

6. Minute

2.1 Set an alarm

2.1.1 In the local time display mode, hold down the MODE button till you see the hour digit is

blinking, then press the RESET button to set the hour.

2.1.2 Press the ST/STP button once, you will see the minute digit starts blinking, then press the

RESET button to set the minute.

2.1.3 Press the MODE button once to save the setting and exit the alarm setting mode.

User Manual

7. Date

8. ST/STP Button

9. Hourly Chime Indicator

10. Alarm Indicator

11. Light Button

12. Second

Table of Contents

Do you have a question about the W70 and is the answer not in the manual?

Page 1 User Manual Model Number: W70 / W71 I. Product Overview 1. Week Day 7. Date 2. RESET Button 8. ST/STP Button 3. Hour 9. Hourly Chime Indicator 4. PM Indicator 10. Alarm Indicator 5. MODE Button 11. Light Button 6. Minute 12.
Page 2 2.2 Turn On/Off Alarm In the local time display mode, press ST/STP and RESET button at the same time to turn on or turn off the alarm. III. Turn On/Off Hourly Chime Function 3.1 In the local time display mode, press the ST/STP and RESET button at the same time to turn on or turn off the hourly chime function.
Page 3 4.4 Press the ST/STP button once again, you will see the month digit starts blinking, then press the RESET button to set the month. 4.5 Press the ST/STP button once again, you will see the date digit starts blinking, then press the RESET button to set the date.
Page 4 5.4 Press the RESET button once to show the 2nd lap read, the watch is still working for the third lap time counting. 5.5 Keep pressing RESET button to show more lap reads. 5.6 Press the ST/STP button again to stop timing. 5.7 Press the RESET button to clear.

W71