Table of Contents
Advertisement
Troubleshooting
Display Problems
If the Notebook Is On, But the Screen Is Blank
■
Move the mouse or tap the TouchPad. This will wake the
display if it is in Display-off mode.
■
If the notebook is cold, allow it to warm up.
If the Screen Is Difficult to Read
■
Set the display resolution to its default setting of 1024 × 768
or higher, depending on your model, by selecting Start >
Control Panel > Appearance and Themes > Display.
■
Adjust the size of the desktop icons and labels.
■
Adjust the brightness of the screen.
If an External Display Does Not Work
■
Check the connections.
■
The external monitor may not be detected. In the BIOS Setup
utility, try setting Video Display Device to Both in the System
Devices menu.
■
If you are using a TV connected to the optional S-Video port,
you must activate the TV.
■
Install the driver or .inf file for your specific monitor
❏
❏
4–2
Select the external monitor as the primary display device
in the display properties
Continue to toggle
enabled.
until the external display is
Fn+F5
Startup Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Personal Computer and is the answer not in the manual?
Questions and answers