Candeo Zigbee C201 Quick Start Manual

Candeo Zigbee Dimmer Module - C201
The Candeo C201 module is a Zigbee dimmer
for dimmable LED lamps.
The minimum and maximum brightness
settings of the dimmer can be adjusted to
achieve the optimum dimming range for a
particular load, as can the speed of dimming
when using a retractive switch.
Specifications
Input Voltage
Power Load
Minimum Load per lamp
Dimmer Mode
Control Method
Features
• Zigbee AC phase cut dimmer based on latest Zigbee 3.0 protocol
• 220V-240V AC Input and Output Voltage
• Supports resistive loads and capacitive loads
• Trailing edge control
• Enables ON/OFF control and dimming of connected triac dimmable led lights or led drivers
• Zigbee end device that supports Touchlink commissioning
• Can directly pair to a compatible Zigbee remote via Touchlink without coordinator
• Supports self-forming Zigbee network without coordinator and add other devices to the network
• Supports find and bind mode to bind a Zigbee remote
• No neutral required
• Radio Frequency: 2.4GHz
• Waterproof grade: IP20
Safety Warnings and notes
• Turn Off Mains Power before installing the device
• Certain light sources may not behave according to the power rating when used with a dimmer. An overload
will result in the safety features switching the dimmer off. We recommend only using this dimmer within the
suggested load, and with high quality dimmable bulbs.
• Please ensure that your bulbs or lamps are minimum 5W and the total load is minimum 10W. Results may
vary with low quality bulbs or lamps, and with a low power load you may need to fit a bypass on the first
lamp in the circuit.
220V-240V ~ 50Hz
10-250VA LED
10-250W Halogen
5W
Trailing Edge
Smart control /
multi-way switching
C201
Do not dispose of with household waste
Do not expose the product to moisture or
liquids
Do not attempt to open the product to
examine or repair.
This product is designed for indoor use only.