Advertisement
Available languages
Available languages
Setting the Time & Date
The clock will synchronize to RDS/DAB clock once receiving the RDS/DAB signal if the clock was not set in
advance.
Follow the below steps to set the time and date manually.
1. Turn on the unit by pressing the On/Off button (3.), then press the Mode button (7.) to select FM or DAB
mode.
2. Press the Menu button (2.) and press Tune + / - (4) button to select <System>, press Enter button (8.) to
confirm.
3. The display will show <Time>, press Enter button (8.) to enter.
4. The display will show <Set time/Date>, press Enter button (8.) to enter.
5. Set the hour and minitues by pressing Tune + / - (4) button and press the Enter button (8.) to confirm.
6. The display will change to "Set date 1-1-2020". Then set the day / month / year by pressing Tune + / - (4)
button and press the Enter button (8.) to confirm.
7. The display will show <Time saved> meaning the time and date has been stored successfully.
8. Under the <System> <Time> setting, you can also set the hour / date format.
Please follow the below breakdown of the menu for operation.
Pressing Tune + / - (4) button to select and press the Enter button (8.) to enter/confirm.
Press Menu button (2.) again to quite the setting.
<System> <Time> <Set time/Date> Follow the instruction "Setting the Time & Date"
<Auto update> Update from Any (The system will automatically update the time and
<Set 12/24
hour>
<Set date
format>
•
The preset time will be reset completely if disconnecting the main power supply. You are
recommended to switch the system into standby mode for convenient use.
Listening to radio
FM Operation
Manual tuning
1. Turn on the unit by pressing On/Off button (3.), then press the Mode button (7.) to select FM mode.
2. Press the Tune + / - (4) button to tune your desired station.
3. Rotate volume up/down knob (5.) for the desired volume level.
Auto tuning
1. Press and hold the Tune + / - (4) button for a while then release the button. Unit will start to scan at up or
down direction until radio station received.
2. Rotate volume up/down knob (5.) for the desired volume level.
date once receiving the RDS/DAB signal)
Update from DAB (The system will automatically update the time and
date once receiving the DAB signal)
Update from FM (The system will automatically update the time and
date once receiving the RDS signal)
No update (If you prefer to set the time and date manually, please
select this setting)
Set 24 hour
Set 12 hour
DD-MM-YYYY
MM-DD-YYYY
7
Advertisement
