NextBase 522GW User Manual page 44

Product Compliance Information
Product Wireless Information
2.4G Wi-Fi (EIRP Max 13.41dBm), BT(EIRP Max. 6.23dBm), BLE( EIRP Max. 5.56dBm)
ACMA RCM Notice to Users in Australia & New Zealand
Having had regard to documents submitted, our Authorised Agent
(Global Approvals ACN/ARBN 25 497 357 455) is satisfied that the in-vehicle accessory product
NBDVR522GW complies with the requirements of the relevant ACMA Standards made under the Radiocommunications
Act 1992 and the Telecommunications Act 1997. The full compliance declaration, including the details of the applicable
standards and documents submitted can be found on our website at https://www.nextbase.com/certifications
CE
Hereby, Portable Multimedia Limited declares that the radio equipment type 522GW Dash Cam is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.nextbase.com/certifications/
UKCA
Hereby, Portable Multimedia Limited declares that the radio equipment type 522GW Dash Cam is in compliance with
UK Regulation S.I. 2017 No. 1206 . The full text of the UKCA declarations of conformity are available at the following
internet address: https://www.nextbase.com/certifications/
RF Exposure Information (MPE)
This device meets the EU requirements and the International Commission on Non-Ionising Radiation Protection (ICNIRP)
on the limitation of exposure of the general public to electromagnetic fields by way of health protection. To comply with
the RF exposure requirements, this equipment must be operated in a minimum of 20 cm separation distance to the user.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
(1) the device may not cause harmful interference, and
(2) the device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does casue harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV Technician for help.
- This appliance and its antenna must not be located or operated in conjunction with any other antenna or transmitter.
- A minimum separation distance of 20cm must be maintained between the antenna and the person for the applianc
to satisfy the RF exposure requirements
FCC Caution
This product dies not contain any user serviceable parts. Repairs should only be made by an authorisied
Nextbase™ service centre. Unauthorized repairs or modifications could result in permanent damage to
the equipment, and void your warranty and your authority to operate this device under Part 15 regulations.
IC Warning
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause intereference, and
(2) this device must not accept any intereference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillge est susceptible
d'en compromettre le fonctionnement.
This device has been evaluated to meet general RF exposure requirement. To maintain compliance with
RSS-102 - Radio Frequency (RF) Exposre guidelines, this equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
le depositif de a été évalué à répondre général rf exposition exigence. Pour maintenir la conformité avec les
directives d'exposition du RSS-102 - Radio Fréquence (RF). Ce matériel doit être installé et exploité à une distance
minimale de 20cm entre le radiateur et votre corps.
IC: 28201-NBDVR522GW
FCC Identifier and ISED Certification Number
The FCC Identifier (FCC ID) is available as an E-label within your Dash Cam's System Info pages.
To view the FCC ID please follow the steps below:
FCC Identifier and ISED Certification Number
Step 1:
Press the 'Menu' button to enter Press the 'Setup' button.
the Dash Cam's menu system.
Note:
- The Regulatory Information (inc. the FCC ID) is embedded with the Dash Cam's firmware, applied to the gift box and
included within this User Manual.
- The FCC ID cannot be changed by the user.
The device meets the FCC Radio Frequency Emission Guidelines and is certified with the FCC. Information about this
product is on file with the FCC and can be found by inputting the Product's FCC ID (available on the product gift box
and as an e-label accessible as per the information given above) into the FCC ID. Search form available at:
https://www.fcc.gov/oet/ea/fccid
The party responsible for FCC compliance is:
Portable Multimedia Limited, 230 Blackfriars Road, London, England, SE1 8NW
To contact Nextbase about the device's FCC equipment authorization, please write us at the address
shown above or contact us using the following address: compliance@nextbase.co.uk.
Step 3:
Step 2:
Swipe through the menu pages
and select System Info.
Connect Apps
System Info
HVIN:
Firmware:
Serial No:
FCC ID: 2AOT9-NBDVR522GW-B
IC: 28201-NBDVR522GW
Battery Status:
The FCC Identifier (FCC ID) is
seen as above.
522GW
Rxx.x
123456789
Charging
44