Table of Contents
Advertisement
GENIUS
4.8
Battery change in the infrared handheld transmitter
If the batteries have only approx. 40% of their capacity, three short beeps sound after an
opening operation or at the beginning of a programming operation. This signal warns that a
battery change is necessary. However, all functions can be executed as normal for a longer
Fig. 22
inserted with the (+) side upwards. Sent the used batteries for recycling.
Safety note:
The battery must never be recharged, dismantled, heated above 80° or burnt, as this can cause it to
explode!
Do not hold the battery with tweezers or a similar tool, as this can cause a short-circuit.
Wipe the battery with a clean, dry cloth to ensure a good contact.
Batteries should be kept away from children. If they are inadvertently swallowed, contact a doctor
immediately. The outer mantle can dissolve and the chemicals inside the battery can cause severe
damage to the stomach and intestines.
period. After the batteries have been changed, all programmed functions of the
IR handheld transmitter are retained.
To change the batteries (2 x CR 2016), push the smooth side of the handheld
transmitter case backwards, simultaneously pushing upwards. Grip the batteries
at the sides and push them one after the other towards the screw. When inser-
ting the new batteries, observe the correct polarity. The batteries must both be
19
Advertisement
Table of Contents
