Related Manuals for KFV SIEGENIA A-opener 2.2
Summary of Contents for KFV SIEGENIA A-opener 2.2
- Page 1 OPERATING INSTRUCTIONS Electro-mechanical systems A-opener 2.2 Window systems Door systems Comfort systems...
-
Page 3: Table Of Contents
Operating instructions Electro-mechanical systems A-opener 2.2 Content INTRODUCTION .........4 Producer and service ........4 Target group of this documentation ..... 4 Intended use ..........4 Improper use ..........4 Maintenance and service notes ....4 Dimensions ........... 4 Symbols used ..........4 Other types of presentations ...... -
Page 4: Introduction
– in vertical installation order. – in a technically sound condition – in conjunction with KFV products and accessories Cross reference A cross reference in the flow text is enclosed by Improper use brackets. -
Page 5: Safety
Operating instructions Electro-mechanical systems A-opener 2.2 Safety WARNING • All work on the 230 V AC mains power supply The signal word "Warning" designates a potential must be carried out in compliance with the current hazard. If this hazard is not prevented, it could lead to German VDE regulations (e.g., VDE 0100) and any death or severe injuries. -
Page 6: Connections And Operating Elements
Operating instructions Electro-mechanical systems A-opener 2.2 Connections and operating elements Item Function SI-BUS connection Analogue connection Button with menu LED for menu navigation (located under the label) to make all adjustments of the A-opener. During the navigation through the menu, the individual colours and statuses (shining or flashing) provide information on the position of the user in the menu (see chapter 4.1). -
Page 7: Operation
Operating instructions Electro-mechanical systems A-opener 2.2 Operation Menu navigation The menu navigation button and indicator of the status LED can only be operated in the uninstalled state. f To proceed to the menu, press A B C D 2 3 4 A B C D 2 3 4 the button on the A-opener for 8... -
Page 8: Menu Structure
Operating instructions Electro-mechanical systems A-opener 2.2 f Hold down the button for 3 sec- onds to select a function. A B C D 2 3 4 f An acoustic signal sounds as A B C D 2 3 4 acknowledgement. f You will exit the menu. -
Page 9: Functions
Operating instructions Electro-mechanical systems A-opener 2.2 Functions 4.3.1 Volume of the buzzer The buzzer delivers the acoustic feedback of the opening process or malfunction. The volume for the feedback of the opening process is adjustable in five stages from 0 % to 100 %. Coupled to this is the sound volume of the button of the menu button with exception of the stage 0%. -
Page 10: Device Services
Operating instructions Electro-mechanical systems A-opener 2.2 4.3.2 Device services The following functions can be carried out in the menu „device services“: Function explanation The device restarts (reboot) without separation from the supply voltage. Restart the device All other functions in the A-opener 2.2 are reset to the default values on delivery. Default settings The software version is issued via a certain LED code (only for service purposes). -
Page 11: System Services
Operating instructions Electro-mechanical systems A-opener 2.2 4.3.3 System services The menu “system services“ can be retrieved for approx 10 minutes after the supply voltage has been established. No further adjustments can be made afterwards. The 10 minutes are available once again after the supply voltage has been disconnected and reconnected. The following functions can be carried out in the menu „system services“: Function explanation... -
Page 12: Wifi
Operating instructions Electro-mechanical systems A-opener 2.2 4.3.4 WIFI The menu “WIFI“ can be retrieved for approx 5 minutes after the supply voltage has been established. No further adjustments can be made after- wards. The 5 minutes are available once again after the supply voltage has been disconnected and reconnected. The following functions can be carried out in the menu „WIFI“: Function explanation... -
Page 13: Display Of Status Led
Operating instructions Electro-mechanical systems A-opener 2.2 Display of status LED Buzzer Description Action Comment Disturbance-free lights up green Opening signal is present Flashes green If the fault persists Faulty contact of the connecting Check connecting clamps Contact service partner if the Flashes yellow clamps fault persists. - Page 14 Operating instructions Electro-mechanical systems A-opener 2.2 14/16 09.2019 H47.ELEKS011EN-00...
- Page 16 www.siegenia.com...
Need help?
Do you have a question about the SIEGENIA A-opener 2.2 and is the answer not in the manual?
Questions and answers