Download Print this page

Verkada CD42 Install Manual page 7

Indoor dome camera

Hide thumbs Also See for CD42:

Installation

Mounting

Use the provided T10 security torx security screwdriver to

Note

loosen the screws and lift the cover. To remove the

mount plate, loosen the mount plate screws and twist

the camera counter-clockwise. Lift the camera vertically

off the base plate and set aside.

Use the provided mounting template to mark wall

mount holes. For a junction box mount, use the

mounting template to determine the correct hole

pattern.

For a solid material like wood or metal, drill 1/8 inch pilot

holes. Drive mounting screws directly into the pilot holes.

For drywall, drill 1/4 inch holes. Insert plastic anchors into

holes and drive mounting screws into anchors.

To secure the camera, place it over the mount plate

screws and twist counter-clockwise. Tighten the mount

plate screws with a Phillips screwdriver.

Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401

sales@verkada.com

All specifications are subject to change without notice

Cd52