Table of Contents
Advertisement
12.4 MOVING MACHINE OFF
‡ When moving the machine off, check that the area around the
machine is safe, then sound the horn before starting.
Do not allow people near the machine.
There is a blind spot behind the machine, so be particularly
careful when traveling in reverse.
‡ When starting the machine on slopes, set transmission cut-
off switch 1 to the OFF position, depress left brake pedal 2
while depressing accelerator pedal 3, then gradually release
left brake pedal 2 to allow the machine to start.
1. Check that caution pilot lamp 4 is not lighted up.
2. Set safety lock 7 of bucket control lever 5 and lift arm control
lever 6 to the FREE position.
3. Operate lift arm control lever 6 to set the work equipment to the
travel posture shown in the diagram on the right.
4. Depress right brake pedal 8 and turn parking brake switch 9 to
the OFF (RELEASE) position to release the parking brake.
Keep right brake pedal 8 depressed.
REMARK
If the parking brake is still actuated when parking brake switch
9 is at the OFF (RELEASE) position, turn the parking brake switch
ON, then turn it OFF again.
WARNING
12. OPERATION
2-75
Advertisement
Table of Contents
