Auto Restart Function - Mitsubishi Electric PAA-A18 AA1 Operation Manual

5.4. Auto restart function

Indoor controller board
This model is equipped with the Auto Restart Function.
When the indoor unit is controlled with the remote controller, the operation mode, set temperature and the
fan speed are being memorized by the indoor controller board. The Auto Restart Function enables the PAA
unit to restart from the last memorized operating parameters (operation mode, set temperature and the fan
speed) always.
The Auto Restart Function can be set by using the remote controller (Mode no. 01) as follows.
Mode Mode
No.
Automatic recovery
01
after power failure
© 2022 Mitsubishi Electric US, Inc.
PAA-A18, 24, 30, 36, 42AA1/BA1/CA1
Settings
Disable
Enable (four mi-
nutes of standby
time is required af-
ter the restoration
of power)
16
Set- Unit Numbers
ting
No.
1
Set "Grp." for the unit num-
2
ber. These settings apply
to all the connected indoor
units.
Specifications are subject to change without notice.