Advertisement
Commissioning
Once the card is installed, the commissioning phase can start. Use the keypad to go to menu 02, which will show that the
card is properly recognized and ready to operate
ADV200 WA fw 1.0: I/O 6 identifies the EXP-IO-SENS-1000-ADV card.
NOTE
ADV200 WA fw 2.0 and higher: I/O 8 identifies the EXP-IO-SENS-1000-ADV card.
ADV200 fw 7.0 and higher: I/O 8 identifies the EXP-IO-SENS-1000-ADV card.
The Slot where the card is plugged in is shown.
Ordering Information
When ordering the EXP-IO-SENS-1000-ADV card please quote commercial code: S5L37.
__________________________________________________________________________
WEG Automation Europe S.r.l.
Via Carducci, 24 - 21040 Gerenzano [VA] ITALY
Ph. +39 02 967601 - Fax +39 02 9682653 - info.motion@weg.net - www.weg.net
EXP-IO-SENS-1000-ADV_EN
8
Advertisement
