Advertisement
Installation
To install the card refer to the "Installation of optional cards" chapter in the "ADV200 WA & ADV200 Quick Start" installation
handbook. This chapter describes the procedure for installing the card.
During installation bear in mind the following:
Do not connect an external voltage or current generator to the ports as specified in the connections table;
The analog I/O terminations have no mutual galvanic insulation. Galvanic insulation is only available between the
terminations and the control card.
CAUTION: Use only the supplied screws !
Power LED:
__________________________________________________________________________
LED
EXP-IO-SENS-1000-ADV_EN
7
Advertisement
