WEG EXP-IO- SENS-1000-ADV Instruction Manual

Instruction Manual
EXP-IO- SENS-1000-ADV
I/O Expansion card
• 2 PT1000 / NI1000 / Analog Inputs
• 1 Klixon / PTC / KTY84 Input
• 1 Klixon / PTC / KTY84 Output
• 2 Analog Outputs

Drive Requirements
The EXP-IO-SENS-1000-ADV card is designed for the following drives:

Drive Type: ADV200 WA (all versions); Recommended Firmware Release: 1.0 or later.
 Drive Type: ADV200 (all versions); Firmware Release: 7.0 or later.

Description
The EXP-IO-SENS-1000-ADV is an optional expansion card for the ADV200 and ADV200 WA product family. This card
enables measurement of ambient temperature values via PT1000 or NI1000 external probe, and of motor temperatures via
Klixon, PTC or KTY84 external probe. The following I/O terminals are available on the card:

2 x Inputs for temperature measurement via PT1000 or NI1000 probe within the range of -20°C ÷ 150°C / -4°F ÷
302°F or alternately working as 2 x analog inputs for analog measurement (selection via software configuration)
 1 x Input for temperature measurement via Klixon, PTC or KTY84 probe;

1 x Output for Klixon, PTC or KTY84 probe power supply;

2 x Analog Outputs.
About the Analog Outputs:
 The analog outputs are manually configurable by means of a dedicated dip switch to select current or voltage
mode (see picture in the next paragraph);

The analog outputs can work in current mode within the range of 0 ÷ 20mA or in voltage mode within the range of
0 ÷ 10V.
NOTE The drive can host one single card.

Connections
Card pinout details are shown below:
91 92 93 94
__________________________________________________________________________
95 96 97 98
EXP-IO-SENS-1000-ADV_EN
S2+ TMP nu 51 52 53 54 61+
Cod. 1S5L37
Rev. 0.7 – 26-1-2023
61- 62+ 62-
1