General Safety Instructions For Operating The Machine - Acer ATL 1840E Operation Manual

1. SAFETY INSTRUCTIONS
WARNING
Do not install, operate, or service this machine until:
1) You have read and understand the safety instructions on the pages that
follow.
2) You have read and understand the operator's manual, especially knowing the
function and location of all machine controls and read manuals for any
related accessories.
3) You have read and understand all safety and instruction plates attached to
the machine and its related accessories.
4) Prior to install or service the machine read and understand the maintenance
manual.
5) To service the machine must be done only by competent and trained
personnel.
6) This machine is only suitable to general metal cutting and made use of
water-soluble cutting coolant. It is prohibited (by flammable and
explosive cutting coolant) to cutting
7) The CNC lathe is not designed / not applied in the working with flammable
metalworking fluids or pyrophoric material and the use of combustible
metalworking fluids"
NOTICE
The following safety instructions are general recommendations for most
common operations on a turning machine.
Additional safety measures may be required for your particular application.
Therefore, makes no warranty or representation as the absolute correctness of
sufficiency of the instructions.

1.1 General safety instructions for operating the machine

1) The best defense against injuries on a turning machine is to be alert. Never
initiate a machine function unless you completely understand what the
function will cause the machine to do.
2) Never operate the machine with any cover or shield opened or removed.
Page 1-1