Machine Placing; Machine Clean & Lubrication - Acer ATL 1840E Operation Manual

3.3.3 Machine placing

Before placing the machine, fix the adjusting screws on the base, make the
machine as close as possible to the floor, and position the leveling pads in their
most suitable place, so as to increase the stability of machine.
3.3.4 MACHINE CLEAN & LUBRICATION
All protective coating must be removed before using the machine. Do not
attempt to move slideways if the coating still exists. Be cautions while selecting
a suitable cleaning agent, WD-40 applied with a clean brush will soften the
protective coating. The protective coating can then be removed with clean
rags.
NOTICE
1) Do not use gasoline or any other flammable solution to clean the machine
2) Clean and lubricate all the exposed ways of table and saddle. Drive the table
& saddle to one end of travel. Clean and lubricate ways thoroughly then drive
table & saddle to the other end and clean and lubricate ways thoroughly as
well. Be sure to use a suitable lubricant.