Unit Operation Is Begun After Maintenance - Acer ATL 1840E Operation Manual

contact with the responsible person. Do not decide by yourself.
2) Over-travel limit and proximity switches and interlock mechanisms including
function Parts should not be removed or modified.
3) When working at a height, us steps or ladders which are maintained and
controlled daily for safety.
4) Fuses, cables, etc. should be made by qualified manufacturers should be
employed.
5) Main spindle motor speeds (rpm) couldn't be over the Max. speed of
Chuck
6) After boot, three-color warning light (as shown)
will blink two seconds each. In this case,
please confirm whether the three-color light
bulb is normal or not.
Three-color light represent. :
Red represents: Exception/alarm malfunction
Yellow represents: End processing/
Green represents: processing

1.4.11 Unit operation is begun after maintenance

WARNING
1) Arrange things in order around the section to receive the maintenance,
including working environments. Wipe water and oil off and provide safe
working environments.
2) All parts and waste oil should be removed by the operator and placed far
enough away from the machine to be safe.
CAUTION
1) The maintenance person should make sure that the machine operation safe.
2) Maintenance and inspection data should be recorded and kept for reference.
Information provided
Page 1-15
RED
YELLOW
GREEN