Compaq Evo N800c Series Maintenance And Service Manual page 84

Removal and Replacement Procedures
5. Remove the MultiBay device by following these steps:
a. Turn the computer bottom side up with the right side
b. Slide and hold the MultiBay release latch toward the
c. Use the notch in the MultiBay device to slide the device
d. Remove the MultiBay device.
Figure 5-4. Removing a MultiBay Device
Reverse the above procedures to install a MultiBay device.
5–6
facing forward.
front of the computer
out of the MultiBay
1 (Figure 5-4).
.
2
Maintenance and Service Guide