Table of Contents
Advertisement
Figure B-2 shows a simplified schematic of a remote relay module (RMD1 for
example). Notice that P1 connector pins 1, 3, 4, and 5 set the Remote Module Code
(RMC). For the 75 Ohm relay modules, the code is FF11
. These pins set the code
h
for RMC00-RMC03, RMC10-RMC13, RMC30-RMC33 on P200 and
RMC20-RMC23, RMC40-RMC43, and RMC50-RMC53 on P400.
Figure B-15. Relay Module Simplified Schematic
62 RF Multiplexer Registers
Appendix B
Advertisement
Table of Contents
