HP E1472A User Manual page 50

Command Subsystem
[ROUTe:]
SYSTem
Command
*RST Reset
*TST? Self Test Query
Chapter 4
SCPI Commands Quick Reference
Command/Parameter
CLOSe <channel_list>
CLOSe? <channel_list>
OPEN? <channel_list>
:ERRor?
:CDEScription? <number>
:CTYPe? <number>
:COPTion? <number>
:CPON <number> |ALL
IEEE 488.2 Common Commands Quick Reference
Title
Connects channel 0 to COM 0 on all banks.
Returns +0 if self test passes.
Returns +cc01 for firmware error.
Returns +cc02 for bus error (communications problem with card).
Returns +cc03 for bad ID information.
Returns +cc10 if an interrupt was expected but not received.
Returns +cc11 if the busy bit was not held ≈ 9 to 17 msec.
Description
Close Channel(s).
Query Channel(s) closed.
Query channel(s) opened.
Returns error number/message in a switchbox Error
Queue.
Returns description of module in a switchbox.
Returns the module type.
Returns the RF Multiplexer/Expander module
configuration.
Sets specified module to its power-on state.
Description
Command Reference 49