Spare Parts; Ordering Spare Parts - unicraft ESW Series Operating Instructions Manual

Spare Parts

13 Spare Parts
DANGER!
Danger of injury by the use of
wrong spare parts!
Dangers may result for the user and damages as well
as malfunctions may be caused by using wrong or
damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
The manufacturer's warranty will become null and
void if non-permissible spare parts are used.

13.1 Ordering spare parts

The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item No.
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indica-
tions may not be taken into consideration. If the indica-
tions regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of manufacture on the type plate fixed to
the device.
16
Example
The load hook for the electrical cable winch ESW 500
must be ordered. The load hook is identified in the spare
parts drawing with the number 88.
By ordering spare parts, please send a copy of drawing
with marked part (load hook) and marked positon num-
ber (88) to your dealer or to the spare parts department
and provide the following information:
- Type of device: Electrical Cable Winch ESW 500
- Spare part: Load Hook
- Item number: 6199500
- Position number: 88
ESW-Series | Version 1.08