Operating Instruction Manual of Energy Management System
EBL 208 S, Art.-No. 911.470
Contents
1.
Description
2.
Safety Information
3.
Operating Instructions
4.
Transport, Storage, Installation
5.
Electrical Installation
6.
Power-Up, Shut-Down, Maintenance
7.
Malfunctions
8.
Enclosure
1.
Description
The energy system EBL208 S contains the charging module LAS 1216, the battery monitor module
BW 208, the complete 12V distribution, fused 12V circuits, a connector for a solar regulator and
additional control and monitoring devices.
The charging unit is designed as a primary controlled switch-mode power supply.
This modern design ensures high power output with compact dimensions and light weight.
To operate the energy system and to control the living-area functions including accessories
an instrument panel is compulsory.
1.1
Suitable Accessories (not supplied)
control and switch panel
solar regulator
1.2
Technical Data
1.2.1
General Data
sizes (h x w x d in mm)
weight
cabinet
frontpanel
1.2.2
Electrical Data
mains supply
power consumption
suitable batteries
steady load off
living-area battery
load current of alternator's
D+ output by EBL
permissable load...
...on 12V outputs
...anti-freeze valve
...D+ terminal
note: operating instruction manual is intended for the owner and has to come with the EBL
Schaudt GmbH - Elektrotechnik & App.-bau - 88677 Markdorf - Germany 13.12.2001
instrument panel IT 204
LR 1214, art.no 922.202, for solar modules with a total maximum
current of 14A, with 3-p connector and a connecting cable 0.5m.
130 x 275 x 170 incl. mounting sockets
1.8 kg
PA (Polyamid), gentian blue RAL 5010
aluminium, powder painted, light grey RAL 7035
* 230V (+ 10 / - 15%), 47 - 63Hz, safety class 1
* 280W
* 6 cell lead-acid or lead-gel batteries, more than 55Ah
* without mains supply, battery alarm 'OFF', a battery voltage
of 12.6V and with IT 204: 0.6mA
* approx 0.4A without load at D+ terminal,
see schematic diagram
* maximum current draw up to the fuse rating of each output,
see enclosed schematic diagram
* max 0.1A
* 1A, with D+ input fused by 2A.
Seite 1 / 7
Need help?
Do you have a question about the EBL 208 S and is the answer not in the manual?
Questions and answers