General Information; Introduction - Daniels Electronics MT-3 Instruction Manual

1
General
InformatIon
I n tr o d u C t I on
The MT-3 FM Transmitter Mainboard integrates
the MT-3 Front Panel Board, MT-3 FM Audio
Processor, Synthesizer module and Amplifier
module together to comprise a MT-3 series
transmitter.
The front panel board and the audio processor
are soldered directly to the transmitter
mainboard while the amplifier and the
synthesizer modules are frequency band
sensitive, plug-in modules.
Circuitry and jumpers on the transmitter
mainboard control the operation of the modules
as well as the overall operation of the MT-3 FM
transmitter. Power and signal connections are
made through the 48-pin Type F connector on
the rear of the transmitter mainboard where they
are then routed to the other MT-3 modules.
The transmitter enclosure is formed by the front
panel face plate and aluminum shell attached
to the transmitter mainboard and the rear panel
plate attached to the aluminum shell.
MT-3 FM Transmitter Mainboard Instruction Manual
IM20-MT3TXMN