Daniels Electronics MT-3 Instruction Manual page 2

ii
DOCUMENT CONTROL
DOCUMENT REVISION
DEFINITION
NOTE
MT-3 FM Transmitter Mainboard Instruction Manual
IM20-MT3TXMN
This document has been produced, verified and controlled in
accordance with Daniels Electronics' Quality Management System
requirements.
Please report any errors or problems to Daniels Electronics' Customer
Service Department.
Daniels Electronics Ltd. utilizes a three-level revision system. This
system enables Daniels to identify the significance of a revision.
Each element of the revision number signifies the scope of change as
described in the diagram below.
Major Revisions: The result of a major
change to product function, process or
requirements.
Minor Revisions: The result of a
minor change to product, process or
requirements.
Editorial Revisions: The result of typing
corrections or changes in formatting,
grammar or wording.
Three-level revision numbers start at 1-0-0 for the first release. The
appropriate element of the revision number is incremented by 1 for each
subsequent revision, causing any digits to the right to be reset to 0.
For example:
If the current revision = 2-1-1 Then the next major revision = 3-0-0
If the current revision = 4-3-1 Then the next minor revision = 4-4-0
If the current revision = 3-2-2 Then the next editorial revision = 3-2-3
The complete revision history is provided at the back of the document.
The user's authority to operate this equipment could be revoked through
any changes or modifications not expressly approved by Daniels
Electronics Ltd.
The design of this equipment is subject to change due to continuous
development. This equipment may incorporate minor changes in detail
from the information contained in this manual.
1 - 0 - 0