LH-5000 Operator's Manual
1. Installation
1.1
Installing the Loud Hailer
For desktop mounting
Step 1 Put the hanger in a location where it is easy to install the LH-5000
Loud Hailer.
Step 2 Fix the hanger with four screws.
Step 3 Set the loud hailer to the hanger.
Step 4 Tighten the knob bolts on both sides of the hanger.
Step 5 Connect the intercom speaker to the loud hailer using the color-coded
signal cable.
Make sure that every signal cable is firmly connected.
Step 6 Attach the microphone to the front microphone connector on the loud
hailer.
Step 7 Connect the power cord properly.
5
Installation