Problems With Images - Olympus CAMEDIA C-2020 Zoom Printing Manual

PROBLEMS WITH IMAGES

The picture is out of focus
1
The camera moved when the shutter button was pressed.
[ Hold the camera correctly, and press the shutter button.
(P. 32/33)
2
The viewfinder's autofocus mark was not positioned on the subject.
[ Position the autofocus frame on the subject, or use the focus
lock. (P. 47/111)
3
The lens is dirty.
[ Clean the lens with a soft dry cloth.
4
The mode was not selected correctly.
[ Shoot with the Macro mode when the subject is within the range
of 8"~31". For further distances, shoot with the Standard mode.
(P. 50/62)
5
The Shutter release button was pressed right in front of the camera in
the Selftimer mode.
[ Press the Shutter release button while looking into the viewfinder,
not while standing in front of the camera. Or, use the remote
control. (P. 69/118)
6
The Manual focus was used with the wrong focal range.
[ Use the right Manual focus for the distance. (P. 64/115)
The picture is too dark.
1
The flash was blocked by a finger.
[ Hold the camera correctly, keeping your fingers away from the
flash. (P. 32)
2
The subject was out of the working range of the flash.
[ Shoot within the flash working range. Or, use an extension flash.
(P. 57/75)
3
The flash mode was set to the Off mode.
[ Check the flash mode before shooting. (P. 57)
4
The subject was too small and was backlit.
[ Set the flash to Fill-In mode. (P. 57) Or, use the Spot metering
mode. (P. 61)
192