1. OVERVIEW IMPORTANT: DO NOT use the ASPIRE 200S Lifter without having first read this manual. The ASPIRE 200S is an ergonomically designed mobile stander with a generous safe working load (SWL) of 200kg. This mobile stander is ideally suited as a familiar and reliable solution for institutional and aged care environments.
2. SAFETY PRECAUTIONS INTENDED USE OF THE PRODUCT SAFETY CONSIDERATIONS The ASPIRE 200S Stander has been ALWAYS ensure that attendants have designed to stand and transfer human read this guide before operating this patients with the assistance of one carer patient stander.
3. PARTS GLOSSARY 4. ASSEMBLY 1. Unpack Remove all parts from carton. 2. Attach the mast Insert the mast into the base, ensuring the holes align and secure with base fastening lever bolt. Boom Sling Bar / Yoke 3. Apply thread locker / loctite Lift Actuator a) Locate actuator Mast...
5. PRELIMINARY CHECKS 5. Attach the knee pads Position the knee pads onto the mount point located toward the base of the After charging the battery these checks should be completed prior to initially lifter. Attach with four fixing bolts using the stander: (supplied) 1.
Page 6
12 months since last service or 8000 lift cycles. At this time the lifter outlets. needs to be serviced for safety and to maintain applicable warranty. A full load test should be completed at least every 12 months by an Aidacare The following steps should be completed service technician.
7. STANDING GUIDE Charging Dos & Don’ts: ALWAYS • Charge the battery whenever possible, to maximize battery life. Allowing batteries It is important that carers are familiar with manual handling techniques along with to fully discharge can reduce the useful life of a battery. any sling instructions prior to completing any patient lifts.
• All electrical components should be checked for normal function including battery and battery charger • The actuator shaft should only be wiped with a cloth. DO NOT lubricate, contact Aidacare maintenance 1300 133 120. AS A MINIMUM A FULL SERVICE SHOULD BE COMPLETED EVERY Deluxe Padded Standing Sling 6 MONTHS AND THE LOAD TEST EVERY 12 MONTHS TO MAINTAIN WARRANTY.
The following is a guideline only to general troubleshooting. part assembly or portion thereof which shall be returned to AIDACARE and from OUR Before carrying out any troubleshooting: inspection shows to be defective.
12. SPECIFICATIONS 12. SPECIFICATIONS (CONT.) Product Code LSS390650 Safe Working Load (SWL) 200kg Base Length 1277mm External Base Width 665-1203mm Internal Base Width 561-1103mm Base Width Adjustment Electric Base Height / Under Bed Clearance 110mm Minimum Height of Spreader Bar 857mm Maximum Height of Spreader Bar 1777mm...
____________________________________ Date: _________________________ ____________________________________ Date: _________________________ YEAR 3 Date: _________________________ SPARE PARTS Service Type: _______________________________________________________ SPARE PARTS LIST AVAILABLE UPON REQUEST FROM AIDACARE ON Condition Report: ___________________________________________________ 1300 130 122 or www.aidacarelifters.com.au ___________________________________________________________________ Inspected by: ____________________ Signature: _________________________ Action taken: _______________________________________________________...
Page 12
An old, worn out or faulty sling could be a significant safety risk for your organisation Aidacare’s Sling Audit Program can assist you to ensure your sling inventory is in safe working order at all times. Periodic sling audits are now a mandatory accreditation requirement.
Page 13
AIDACARE PTY LTD BUILDING 3A/1 MOOREBANK Ave, MOOREBANK NSW 2170 1300 133 120 www.aidacare.com.au MADE IN PRC...
Need help?
Do you have a question about the Aspire 200S and is the answer not in the manual?
Questions and answers