Danger Zone; Main Component Locations - jcb CT160 Operator's Manual

Tandem roller
Hide thumbs Also See for CT160:
Table of Contents

Advertisement

Work on a subgrade having a gradient greater than the permissible gradient.
Work on the edges of hillsides or trenches.
Work in regions having continuous construction site traffic.
Additional safety measures can be:
Securing by means of ropes attached to winches or accompanying heavy construction vehicles.
Adequate escape lanes.
Appointment of guides.
Testing the function of the brakes when first driving onto the gradient at the lower end of the gradient
Correspondingly: testing the directional stability of the longitudinal axis of the roller when switching on
the vibration.
The manufacturer/supplier is not liable for damage resulting from such use. The user alone bears the risk.
If the machine is to be used in applications where there is a high silica concentration, risk due to materials
containing asbestos or similar environment based hazards, additional protective measures such as the use
of PPE may be required.
The machine should not be operated by any person who does not have an appropriate level of qualification,
training or experience of use of this type of machine.
Prior to use of the machine, its suitability (size, performance, specification etc.) should be considered with
regards to the intended application and any relevant hazards that may exist. Contact your JCB dealer for
support in determining the appropriate JCB machine, attachment and any optional equipment that is suitable
for the application and environment.
It is also intended that the instruction manual is observed and that the servicing and maintenance regulations
are followed.

Danger Zone

The danger zone is any zone within and/or around the machinery in which a person is subject to a risk to their
health or safety. During operation of the machine, keep all persons out of the danger zone. Persons in the
danger zone could be injured.
Before you do a maintenance task, make the product safe.

Main Component Locations

9
Refer to: Maintenance Positions (Page 87).
9831/7750-1
About the Product
Description
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ct260

Table of Contents