Dane Technologies QuicKART 2000 Series Service Manual page 6

Table of Contents

Advertisement

12)
The electrolyte in a storage battery is an acid, which can cause severe
burns to the skin and eyes. Wear appropriate protective clothing when
working with batteries. Treat all electrolyte spills with an extended flushing
with clear water. Contact a physician immediately if contact is made with
battery acid.
13)
Standard batteries do require regular maintenance. It may be necessary to add
distilled water to the batteries.
14)
Hydrogen gas is formed when charging the batteries.
adequate ventilation when charging QuicKART batteries. Never smoke near
batteries. Do not charge batteries in an area with open flame or where there is
electrical equipment that could cause an electrical arc.
15)
Do not lay metal objects (wrenches, screwdrivers, etc.) on any of the batteries to
prevent electrical short circuits.
16)
Batteries are heavy. Always use care and proper lifting technique to avoid injury
when removing or replacing batteries.
17)
Make sure QuicKART is properly secured when changing tires. (See instructions
on page 41 and 42.)
18)
Two options are available to tether the carts together, a strap or a cart restraint
assembly, these are available as accessories. To view the procedure to strap the
carts see the illustration on pages 10 and 11. The cart restraint assembly also
has a strap and adds a spring to allow some motion of the carts in turns but still
controls them.
Dane Technologies, Inc.
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
www.danetechnologies.com
QuicKART 2000 Series
Use a location with
Service Manual
970-011 Rev. 3/1/06
6

Advertisement

Table of Contents
loading

Related Products for Dane Technologies QuicKART 2000 Series

Table of Contents