EFOY ProFuelBox User Manual page 46


Using an Allen wrench (3mm), remove the two screws (1) holding the parts of the
cable gland together.

Inside the EFOY ProFuelBox, remove the large plastic nut (3) by holding the
opposite side from the outside of the box with your other hand and unscrew the
plastic nut. You do not need any tools for this, the plastic nut is mounted hand-
tight.

Now you can remove the cable entry and take off the cover (2).

You have now uncovered an hole on the side wall of the EFOY ProFuelBox.
Risk of injury! The edge of the opening for the cable gland could be sharp.

Watch out for sharp edges and wear gloves if necessary.
Description of the insertion and attachment of the EFOY Fuel Manager hoses:

Now insert the four EFOY Fuel Manager connectors one after the other through the
opening in the EFOY ProFuelBox.

Remove the gray double cable plugs (4) with the prefabricated holes from the cable
gland and insert the hoses of the EFOY Fuel Manager. Pay attention to the
placement and direction of the hoses. A possible placement variant can be seen in
1
Figure below.
Page 46
Commissioning