In case of doubts about the safety of the machine, do not use it. DESCRIPTION The pump PRATTIK 15 is fitted with flow reverser. Particularly recommended for difficult descaling treatments, they work in complete safety and autonomy enabling the operator to carry out other works at the same time.
The pumps are in conformity with the following European Directives, Laws and Regulations: Machinery Directive 2006/42/EC QUALITY KAMMAK equipments are manufactured with high-quality acid-resistant materials and submitted to severe operating tests. Follow these instructions to avoid any operating and servicing problems.
3 - TECHNICAL FEATURES PRATTIK 15 Vertical axis pump Motor 220 V - 370W/0.5HP Max working pressure 1 Bar Degree of protection Ip54 Max. temperature 60° C Flow rate 90* l/min. Head 10 m Flow reverser Manual Fittings 3/4” Tank capacity 15 lt Dimensions ØxH...
5.2 - FUNCTIONING Switch on the pump. Ensure that valve is in the closed position. The PRATTIK 15 have 2x250 cm Flow/Return hoses fitted with hose connectors at the out board end. In cleaning process: The outboard end of both flow/return hoses should be connected to the heating system (radiator/...
7 - EXPLODED VIEWS AND SPARES DIAGRAMS PRATTIK 15 P.S..: For enquiries on spare parts, please specify always if needed for the model PRATTIK 15. 1. Plast c handle 14. Bolt 6 MA 27. Sw tch 28. Motor flange 2. Motor 220/50 15.
The warranty is valid only if the equipments have been installed, used and properly maintained accor- ding to all directions supplied by KAMMAK in the instructions manual attached to the equipment. Should any conformity defects of the product be found during the warranty period, the Customer shall notify the Dealer to agree upon the terms of repairing and/or replacing of the product.