Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KAMMAK YAK-02
Summary of Contents for KAMMAK YAK-02
- Page 1 YAK-02 User’s manual - Use and Maintenance Descaling pumps...
-
Page 2: Table Of Contents
This manual is a safe guide for the use of the pump. Please read it carefully in all its parts before use. This manual contains important information for the proper working and use of the equipment. KAMMAK reserve the right to introduce any future changes without notice or replacement. PRELIMINARY INSPECTION Upon receipt of the pump, take it out from the carton and check it is in perfect condition. -
Page 3: Regulations - Ce Mark
The pumps are in conformity with the following European Directives, Laws and Regulations: Machinery Directive 2006/42/EC QUALITY KAMMAK equipments are manufactured with high-quality acid-resistant materials and submitted to severe operating tests. Follow these instructions to avoid any operating and servicing problems. -
Page 4: Technical Features
3 - TECHNICAL FEATURES YAK 02 Peripheral pump Motor 220 V - 370W/ HP 0.5 Max working pressure 4 Bar Degree of protection IPX4 Max. temperature 60° C Flow rate 35* l/min. Head 35 m* Fittings 3/4” Tank capacity 10 lt Dimensions HxWxD 31 x 36 x 24 cm Weight... -
Page 5: Safety Instructions
-Now switch on the pump and clean the system. The YAK-02 has 1 x 250 cm Pressure Line and 1 x 250 cm Return Line hoses fitted with 3/4” brass hose connectors at the out board end and 3/4” fittings at the inboard end. -
Page 6: Exploded Views
7 - EXPLODED VIEWS AND SPARES DIAGRAMS YAK 02 P.S..: For enquiries on spare parts, please specify always if needed for the model YAK 02. 1. Return line inlet 10. Pneumatic hose 19. Pressure line outlet 2. Cap 11. Connection hose 1/2" 20. -
Page 7: Directions For Disposal
The warranty is valid only if the equipments have been installed, used and properly maintained accor- ding to all directions supplied by KAMMAK in the instructions manual attached to the equipment. Should any conformity defects of the product be found during the warranty period, the Customer shall notify the Dealer to agree upon the terms of repairing and/or replacing of the product.