Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KAMMAK PROF 01
Summary of Contents for KAMMAK PROF 01
- Page 1 PROF 01 User’s manual - Use and Maintenance Descaling pumps...
-
Page 2: Table Of Contents
This manual is a safe guide for the use of the pump. Please read it carefully in all its parts before use. This manual contains important information for the proper working and use of the equipment. KAMMAK reserve the right to introduce any future changes without notice or replacement. PRELIMINARY INSPECTION Upon receipt of the pump, take it out from the carton and check it is in perfect condition. -
Page 3: Regulations - Ce Mark
The pumps are in conformity with the following European Directives, Laws and Regulations: Machinery Directive 2006/42/EC QUALITY KAMMAK equipments are manufactured with high-quality acid-resistant materials and submitted to severe operating tests. Follow these instructions to avoid any operating and servicing problems. -
Page 4: Technical Features
3 - TECHNICAL FEATURES PROF 01 Peripheral pump Motor 220 V - 370 W/0.5 HP Max working pressure 4 Bar Degree of protection IPX4 Max.temperature 60°C Flow rate 50* l/min. Head 36*m Fittings 3/4” Tank capacity 35 l Heating coil... -
Page 5: Safety Instructions
5.2 - FUNCTIONING Connect pump to the system. Ensure that valve is in the closed position. -Fill the tank with water. -Add cleaning chemical to the tank. -Turn on the heater. PROF-01 has automatic temperature controller on it. Heater automaticaly heats water up to 50°C in the tank. -
Page 6: Exploded Views
7 - EXPLODED VIEWS AND SPARES DIAGRAMS PROF 01 P.S..: For enquiries on spare parts,please specify always if needed for the model PROF 01. 1. Filter 10. Connection hose 1/2" 19. Electric cable 28. Electric cable 2. Tank 11. 2 way connector 3/4"... -
Page 7: Directions For Disposal
The warranty is valid only if the equipments have been installed, used and properly maintained accor- ding to all directions supplied by KAMMAK in the instructions manual attached to the equipment. Should any conformity defects of the product be found during the warranty period, the Customer shall notify the Dealer to agree upon the terms of repairing and/or replacing of the product.