JVC HV-53PRO/K Service Manual page 37

Measuring
Item
instrument
Adjustment Signal
Of SUB generator
CONTRAST
Remote
control unit
Adjustment Signal
of SUB generator
COLOURⅠ Ⅰ Ⅰ Ⅰ
Remote
control unit
SERVICE MENU KEY
ZOOM
(ASPECT) key
SETTING ITEM
SELECT key
(Numbers key)
PICTURE
CONTENTS key
PIP key
FUNCTION key
( )
(▲/▼)&( / ) key
MENU/OK key
MEMORY
(STORE)
key
Test point Adjustment part
6.CONTRAST
7.COLOUR
(PAL/SECAM/NTSC)
PICTURE MODE
key
SERVICE
MENU/
&SYSTEM
CONSTANT key
DISPLAY key
No. 51984
Description
1. Receive any broadcast.
2. Select 2.V / C from the SERVICE MENU.
0. Select 6.CONTRAST with the function UP / DOWN( ▲ / ▼ ) key.
4. Set the initial setting value with the function LEFT / RIGHT
( / )key.
5. If the contrast is not the best with the initial setting value, make
fine adjustment until you get the best contrast.
6. Press the MENU / OK key and memorize the set value.
[Method of adjustment without measuring instrument]
(PAL COLOUR)
1. Receive PAL broadcast.
2. Select 2.V / C from the SERVICE MENU.
3. Select 7.COLOUR with the function UP / DOWN( ▲ / ▼ ) key.
4. Set the initial setting value for PAL COLOUR with the function
LEFT / RIGHT( / ) key.
5. If the colour is not the best with the initial set value, make fine
adjustment until you get the best colour.
6. Press the MENU / OK key and memorize the set value.
(SECAM COLOUR)
1. Receive a SECAM broadcast.
2. Make fine adjustment of SECAM COLOUR in the same
manner as for above.
(NTSC 3.58 COLOUR)
1. Receive a NTSC 3.58MHz COMPOSITE VIDEO signal from
the EXT terminal.
2. Make similar fine adjustment of NTSC 3.58 COLOUR in the
same manner as for above.
(NTSC 4.43 COLOUR)
1. Receive a NTSC 4.43MHz COMPOSITE VIDEO signal from
the EXT terminal.
2. Make similar fine adjustment of 4.43 COLOUR in the same
manner as for above.
HV-53PRO
37