JVC HV-53PRO/K Service Manual page 14

HV-53PRO
PROJECTION UNIT
Remove the SPEAKER GRILLE
Remove the CONTROL BOX
Remove the SCREEN ASS'Y
Remove the REAR PANEL
Remove the REAR COVER
1. Remove the CRT SOCKET PWB.
2. Remove 4 screws marked
UNIT.
3. Remove the PROJECTION UNIT, upward.
NOTE :
Refer to "PROJECTION UNIT REPLACEMENT"
on page10 when taking out and replacing the
PROJECTION UNIT.
When wire clamps are removed during work, use care to
restore them precisely to their original positions.
Performance can be affected if these are not returned to
the original positions.
HV DIVIDER
Remove the REAR PANEL
1. Remove 1 screws marked
2. Remove the HV DIVIDER.
Wires of the transformer (FBT) and CRT of each PROJECTION
*
UNIT can be removed by turning the connector portions.
NOTE :
If necessary, remove the anode wires, and replacing the
HV DIVIDER, take care to correctly engage the
marked connector.
14
attaching the PROJECTION
attaching the DIVIDER.
No.51984
PROJECTION UNIT
HV DIVIDER
Pull Turn
S
T
R