Remote Control; Preparations; Prepare The Remote Control; Replace The Remote Control Battery - Horizon Fitness HAV-S2400W Operating Instructions Manual

Remote Control

1 -
2 - VOL+/VOL-
3 - MUTE
4 – EQ buttons
5 - SOURCE
6 -
7 -
8 - BT PAIR

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.
 Even if the Remote Control is operated within the effective range 19.7 feet (6m), remote control operation
may be impossible if there are any obstacles between the unit and the remote control.
 If the Remote Control is operated near other products which generate infrared rays, or if other remote
control devices using infra-red rays are used near the unit, it may operate incorrectly. Conversely, the other
products may operate incorrectly.
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the protective tab to activate the remote control
battery.

Replace the Remote Control Battery

- The remote control requires a CR2025, 3V Lithium battery.
1. Push the tab on the side of the battery tray towards the tray.
2. Now slide the battery tray out of the remote control.
3. Remove the old battery. Place a new CR2025 battery into the
battery tray with the correct polarity (+/-) as indicated.
4. Slide the battery tray back into the slot in the remote control.
Precautions Concerning Batteries
 When the Remote Control is not to be used for a long time
(more than a month), remove the battery from the Remote
Control to prevent it from leaking.
 If the batteries leak, wipe away the leakage inside the battery compartment and replace the batteries with
new ones.
 Do not use any batteries other than those specified.
 Do not heat or disassemble batteries.
 Never throw them in fire or water.
 Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short circuit,
leak or explode.
 Never recharge a battery unless it is confirmed to be a rechargeable type.
Switch the unit between ON and STANDBY
mode.
Increase/decrease the volume level.
Mute or resume the sound.
Select a preset sound effect.
Select the play function.
Skip to previous/next track in Bluetooth mode.
Play/pause/resume playback in Bluetooth mode.
Activate the pairing function in Bluetooth mode
or disconnect the existing paired Bluetooth
device.

Preparations

20