Related Manuals for Rise CP1
Summary of Contents for Rise CP1
- Page 1 CONTROL UNIT WITH MICROCONTROLLER CP1 CP2 CP4 CP1S CP2S CP4S CP1K CP2K CP4K CP1SK CP2SK CP4SK Made in Italy Operating instructions...
- Page 2 Declaration of conformity The undersigned Mr. Luigi Benincà, legal representative of the company Rise S.r.l. - Via Maso, 27 - 36035 Marano Vicentino (VI) – in the capacity of manufacturer declares that the product: CP1/CP2/CP4 CP1S/CP2SCP4S CP1K/CP2K/CP4K CP1SK/CP2SK/CP4SK - EMC Directive 2004/108/EC and following amendments...
- Page 3 Fig. 1 -CP1/CP1S/CP1SK 3x1,5mm M11.1 M11.2 M11.3 M11.4 M5.2 M5.1 M6.6 M6.5 M6.4 M6.3 M6.2 M6.1 Fig. 2 -CP2/CP2S/CP2SK M6.1 M6.6 M6.1 M6.6 3x2,5mm M6.2 M3.3 M3.1 M3.3 M3.2 M3.4 M7.1 M7.2 M7.4 M7.5 M7.4 M7.5 M12.1 M12.4 M12.1 M12.4 M12.1...
- Page 4 M7.4 M7.4 M7.5 M7.5 M7.5 M7.5 M12.1 M12.1 M12.1 M12.1 M12.4 M12.4 M12.4 M12.4 M9.1 M9.1 M9.1 M9.1 M9.2 M9.2 M9.3 M9.3 M9.4 M9.4 M9.5 M9.5 M9.6 M9.6 M9.7 M9.8 M9.8 M13.1 M13.1 M13.2 M13.3 M13.4 M13.5 4 - CP1/2/4...
-
Page 5: Power Board
Bollard 3 (F2) Bollard 4 (F3) - Ext. siren (F White) + Ext. siren (F Brown) - Anti-frost resistance + Anti-frost resistance POWER Board address Bollard 1 (F0) Bollard 2 (F1) Bollard 3 (F2) Bollard 4 (F3) CP1/2/4 - 5... - Page 6 Fig. 6 -CP1/CP1S/CP1SK - Cabling for 1 bollard Fig. 7 -CP2/CP2S/CP2SK - Cabling for 2 bollards 6 - CP1/2/4...
- Page 7 Fig. 8 -CP4/CP4S/CP4SK - Cabling for 4 bollards CP1/2/4 - 7...
-
Page 8: General Information
In the interest of simplicity, please refer to the illustrations of the CP1 board. The connec- ALWAYS FOLLOW the configuration order related to the bollard: tions and functions are, in any case, the same for the CP2 and CP4 units. - Page 9 Note: Pin 3.1 (use also 3.3 on CP2/CP4) : If you use RISE LED traffic light, simply link the connector to the M10 terminal which Pin 3.1: Positive power supply (+ wires 1, 2 from the bollard) +32Volt DC1 OUT automatically controls the lights and the alimentation of the traffic light.
-
Page 10: Dip Switch Function
In this case only the inputs of the terminal block or an external 4 channels receiver will be used ( no RRWBV plug in receiver). This configuration allows the individual command of 4 bollards, all of them connected to the same control panel CP4 /CP4K / CP4S / CP4SK. 10 - CP1/2/4... - Page 11 NB3: The bollard can rise only after the time count TR1 if it is not resetted from the "ALL sticking.
- Page 12 Turn off the power, press button P and hold it down while turning the power on again. The LED turns red and is steady for 5 seconds before flashing and alternating in colour; release the button. The receiver is now reset and all the transmitters are cancelled. 12 - CP1/2/4...
- Page 13 KAS1 Finder 40319024 Finder 40319024 Rise S.r.l. Quadro elettrico mod: VIGILANT 1 con UPS 230V Data: 17/11/09 Via Capitello di Sopra, 42 36015 Marano Vicentino (VI) Italy Schema vers. 1.2 Pagina 1 di 1 info@riseweb.it - www.riseweb.it CP1/2/4 - 13...
- Page 14 Finder 40319024 Light 2 Light 1 Semaforo 2 Semaforo 1 GREEN Rosso Verde Rise S.r.l. Quadro elettrico mod: VIGILANT 1-S Data: 01/11/09 Via Capitello di Sopra, 42 36015 Marano Vicentino (VI) Italy CP1SK Schema vers. 1.0 Pagina 1 di 1 info@riseweb.it - www.riseweb.it...
- Page 15 Semaforo 1 GREEN Rosso Verde Rise S.r.l. Quadro elettrico mod: VIGILANT 2 con UPS 230v Data: 17/11/09 Via Capitello di Sopra, 42 36015 Marano Vicentino (VI) Italy Schema vers. 2.2 Pagina 1 di 1 info@riseweb.it - www.riseweb.it CP1/2/4 - 15...
- Page 16 Semaforo 1 GREEN Interno Esterno Rise S.r.l. Quadro elettrico mod: VIGILANT 2-S con UPS 230v Data: 17/11/09 Via Capitello di Sopra, 42 36015 Marano Vicentino (VI) Italy 16 - CP1/2/4 Schema vers. 2.2 Pagina 1 di 1 info@riseweb.it - www.riseweb.it...
- Page 17 Semaforo 1 GREEN Rosso Verde Rise S.r.l. Quadro elettrico mod: VIGILANT 4 con UPS 230v Data: 17/11/09 Via Capitello di Sopra, 42 36015 Marano Vicentino (VI) Italy Schema vers. 4.2 Pagina 1 di 1 info@riseweb.it - www.riseweb.it CP1/2/4 - 17...
- Page 18 Semaforo 1 GREEN 1,5mm Rosso Verde Rise S.r.l. Quadro elettrico mod: VIGILANT 4-S con UPS 230v Data: 17/11/09 Via Capitello di Sopra, 42 36015 Marano Vicentino (VI) Italy 18 - CP1/2/4 Schema vers. 4.2 Pagina 1 di 1 info@riseweb.it - www.riseweb.it...
-
Page 19: Manual Operation
STANDARD TRAFFIC LIGHT CONNECTION MAX 1 A M12.1 +24Vdc fix M10.1 +24Vdc Rosso-Red-Rouges-Rot-Rojo M10.2 RELAY 24 Vdc M10.1 +24Vdc Verde-Green-Verts-Grün-Verde M12.4 gnd Aux M10.1 +24Vdc RELAY 24 Vdc M10.2 Verde-Green-Verts-Grün-Verde M10.4 GND +24 Vdc EXT M10.1 +24Vdc M10.1 +24Vdc M10.2 RELAY 24 Vdc MAX 1 A Verde-Green-Verts-Grün-Verde... - Page 20 1 PG 13,5 2 PG 16 CP 4 1 PG 13,5 4 PG 16 RISE S.r.l. - Via Maso, 27 - 36035 Marano Vicentino (VI) - Tel.: +39 0444 751401 - Fax: +39 0444 758049 www.riseweb.it - info@riseweb.it 20 - CP1/2/4...
Need help?
Do you have a question about the CP1 and is the answer not in the manual?
Questions and answers