Beko B5WFT510418WD User Manual page 43

• Excessive laundry is loaded in. >>> Do
not load the product in excess. Load with
amounts recommended in the "Pro-
gramme and consumption table".
• Wrong programme and temperature were
selected. >>> Select the proper pro-
gramme and temperature for the laundry
to be washed.
• Wrong type of detergent is used. >>> Use
original detergent appropriate for the
product.
• Excessive amount of detergent is used.
>>> Put the detergent in the correct com-
partment. Do not mix the bleaching agent
and the detergent with each other.
Washing performance is poor: Oily
stains appeared on the laundry. (**)
• Regular drum cleaning is not applied. >>>
Clean the drum regularly. For this proced-
ure, see Cleaning the Loading Door and
the Drum [} 39]
Washing performance is poor: Clothes
smell unpleasantly. (**)
• Odours and bacteria layers are formed on
the drum as a result of continuous wash-
ing at lower temperatures and/or in short
programmes. >>> Leave the detergent
drawer as well as the loading door of the
product ajar after each washing. Thus, a
humid environment favourable for bac-
teria cannot occur in the machine
Colour of the clothes faded. (**)
• Excessive laundry was loaded in. >>> Do
not load the product in excess.
• Detergent in use is damp. >>> Keep deter-
gents closed in an environment free of
humidity and do not expose them to ex-
cessive temperatures.
• A higher temperature was selected. >>>
Select the proper programme and tem-
perature according to the type and soiling
degree of the laundry.
Washing machine does not rinse well.
• The amount, brand and storage condi-
tions of the detergent used are inappro-
priate. >>> Use a detergent appropriate
for the washing machine and your laun-
dry. Keep detergents closed in an envir-
onment free of humidity and do not ex-
pose them to excessive temperatures.
• Detergent was put in the wrong compart-
ment. >>> If detergent is put in the pre-
wash compartment although prewash
cycle is not selected, the product can
take this detergent during rinsing or
softener step. Put the detergent in the
correct compartment.
• Pump filter is clogged. >>> Check the fil-
ter.
• Draining hose is folded. >>> Check the
drain hose.
Laundry became stiff after washing. (**)
• Insufficient amount of detergent is used.
>>> Using insufficient amount of deter-
gent for the water hardness can cause
the laundry to become stiff in time. Use
appropriate amount of detergent accord-
ing to the water hardness.
• Detergent was put in the wrong compart-
ment. >>> If detergent is put in the pre-
wash compartment although prewash
cycle is not selected, the product can
take this detergent during rinsing or
softener step. Put the detergent in the
correct compartment.
• Detergent was mixed with the softener.
>>> Do not mix the softener with deter-
gent. Wash and clean the drawer with hot
water.
Laundry does not smell like the
softener. (**)
• Detergent was put in the wrong compart-
ment. >>> If detergent is put in the pre-
wash compartment although prewash
cycle is not selected product, the can
take this detergent during rinsing or
softener step. Wash and clean the drawer
with hot water. Put the detergent in the
correct compartment.
• Detergent was mixed with the softener.
>>> Do not mix the softener with deter-
gent. Wash and clean the drawer with hot
water.
EN / 43