Beko B5WFT510418WD User Manual page 38

• If a different-concentration washing
agent is added (to avoid wasting the pre-
viously filled detergent, you can put them
in the powder detergent compartment in
the next washing and consume it by se-
lecting the «powder detergent active» po-
sition on the screen.)
• If the new softener has the same spe-
cifications but only a different scent, (it
should be noted that the scent of the
mixture will be different if it is added
without cleaning the remaining softener),
• If it is not going to be used for a long
time (e.g. at the time of moving to the
summer house and at the time of return,
for 3 months or more), the liquid washing
agent may become denser and may be-
come stiffer at the end, and may not
make dosing although the system indic-
ates full.
Cleaning:
Before starting cleaning, unplug your appli-
ance by pressing the On/Off button.
It is recommended to wear a suit-
able glove so that you do not come
into direct contact with the deter-
gent and other washing materials
that you will empty from the deter-
gent drawer.
1. Press the blue part in the middle of the
detergent drawer to pull it towards you
and remove it.
2. Remove the drain stick located at the
back of the drawer from its slot.
3. Place the slot behind the detergent
drawer to be emptied towards the inside
of the compartment to be emptied.
4. Gently push the drain stick into the slot
behind the detergent compartment.
5. The detergent will start to pour into the
container.
6. The same is carried out for the softener
compartment.
7. The guides holding the top cover of the
detergent drawer are removed with a
flathead screwdriver (there are total of 6
guides, two each on the right, left and
back of the drawer) and the inside of the
drawer is washed.
8. After the completion of the washing pro-
cess, the cover is inserted to the drawer.
Make sure that all guides are in place. If
the guides do not fit, liquid may spill
from the drawer, or the detergent box
may get trapped in the drawer rail or
move in difficulty. Therefore, make sure
that the guides are firmly seated.
9. Insert the drain stick back into its slot in
the back of the drawer.
10.Refit the drawer by paying attention to
its slot and slides and push the drawer
to close. Once detergents and softeners
are added, they will be ready for use in
dosed programs.
EN / 38