Communication Interface Plat（Dvc-A2 Voltage; How It Works - RAYSTECH RT-5100S Manual

There are two LED indicators on the front of the battery to show its operating
status.
Item Designation Definition
1 Running
2 Fault
2.4 Communication interface plat（DVC-A2 voltage）
SW1 DIP switch select for CAN or RS485
SW2 Resistance for communication and DIP switch for parallel connection
SW3 Switch for battery's Address select
SW4 & SW5 Communication interface for battery or master battery with Inverter
Reset Reset the WIFI or GPPS/GPS module configuration

2.5 How it works

Table 2-1 Designations on the battery
Battery normally working without fault
Battery is in a warning state, see troubleshooting in Chapter 8
- 5 -