AQUARIUM INTERNAL
POWER FILTER
UNIT INSTRUCTIONS
WITH IMPORTANT SAFEGUARDS
AND WARRANTY
UL Approved Pump Motor
120V 60 HZ .03A
For Household Use Only
Children Under 13 Must Be
Supervised By An Adult
FILTER MODEL # ASZEP10-PL
COPYDATE 4/13/2021
HANGER INSTALLATION
Locate the adjustable hanger bracket included
with your filter unit. It could have been placed
inside the filter cartridge compartment.
HANGER POST
HANGER BRACKET
Place the hanger bracket at 90° and align one
of the adjustment holes onto the mounting post
as shown in the illustration ABOVE.
Then rotate the hook until the hanger is vertical
as shown in the illustration BELOW.
PLACE WIRE THROUGH
CLEAT ON HANGER
MAINTAINING PROPER WATER LEVEL
Important: Before using the filter submerse the
filter entirely under water until all bubbles disap-
pear. Then hang the filter on the side of the
tank. Always keep in mind maintaining proper
Water Level on the filter is very important to keep
filter running quiet and efficiently. Permitting the
water level to drop below minimum can cause
damage to the filter.
MAXIMUM WATER LEVEL
RECOMMENDED WATER LEVEL
MINIMUM WATER LEVEL
DO NOT OPERATE FILTER BELOW MINIMUM LEVEL
ALWAYS MAINTAIN WATER LEVEL AT
RECOMMENDED WATER LEVEL ON
FILTER TO ASSURE FILTER
FUNCTIONS PROPERLY
TECHNICAL DATA
FLOW RATE
FILTER
WATTAGE
(GPH)
ASZEP10-PL
3.6
45
REPLACEABLE
CARTRIDGE
S
Need help?
Do you have a question about the ASZEP10-PL and is the answer not in the manual?
Questions and answers
Is just the internal pump available for sale as a replacement part? The sticker on the pump reads "ASZEP11-PL. It is used in a small 1.5 gallon Tetra fish tank.