Connecting The Power Adapter; Installing The Battery; Installing The Antenna - Huawei ETS2018 User Manual

Fixed wireless terminal
Table of Contents

Advertisement

If the FWT is powered solely by a fully charged battery, the talk time is three to
five hours or the standby time is 40 to 120 hours (the actual talk time and
standby time are network dependent). If the battery level is low, a low battery
alert is played.

Connecting the Power Adapter

Press and hold the
FWT. Connect the power adapter connector
to the FWT and the other connector to a
power socket.

Installing the Battery

Press and hold the
Install the battery as shown in the following figures. When installing the battery, make sure
that the battery cord plug matches with the battery jack. Do not insert reversely.

Installing the Antenna

The FWT antenna contains the indoor antenna and the outdoor antenna. In the area with
strong signal strength, you can adopt the indoor antenna. While in the area with weak signal
strength, you can adopt the outdoor antenna. For details of antenna selection and
installation, consult your local dealer.
key to power off the
key to power off the FWT and pull out the power supply cable.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ets2218Ets2518

Table of Contents