Installing The Power Adapter; Installing The Antenna; Connecting The Terminal - Huawei ETS1160 Manual

Installing the Power Adapter

Installing the Power Adapter
In normal conditions, the FWT relies on the external
power adapter for power supply.
1
Insert one end of the power adapter into the DC
input port, and the other end into the power sup-
ply jack.
2
If the power indicator is in blue, the connection
is correct.
Use the battery only in the case that the electricity
has failed or the external power adapter is unavail-
able. You must make sure that the battery has been
fully charged before putting it into use.

Installing the Antenna

1
Make sure that the FWT is switched off.
2
Align the antenna with the antenna port on the
FWT host in the direction shown in the figure,
4
and then screw the antenna, ensuring that the
connection is secure.

Connecting the Terminal

• Switch off the FWT and disconnect the power
Note
adapter.
• Use the cable provided by the manufacturer.