Call Validating
After installing, you can make a call to check whether the FWT is correctly installed.
1. Press and hold the
2. Pick up the handset. In the standby mode, the green indicator flashes.
3. If you can make a call, it indicates that the FWT is installed correctly.
Powering On/Off the FWT
When the FWT is powered off, press and hold the
In the standby mode, press and hold the
Making a Call
1. Pick up the handset and press the
2. Enter the desired phone number.
3. The FWT auto dials the number after seven seconds or you can press the
4. Hang up the handset or press the
Answering a Call
When there is an incoming call, you can pick up the handset, press the
key to answer a call.
Note:
In the standby time, press the
Adjusting the Call Volume
When the FWT is in the conversation mode, press the
the call volume.
Adjusting the Ringtone Volume
There are four levels of ringtone volume. In the standby mode, press the
successively to adjust the ringtone volume.
Selecting a Ringtone
The FWT supports 11 ringtones. In the standby mode, press the
successively to select a ringtone.
key to power on the FWT.
key to power it off.
key.
key again to end the call.
key to reject an incoming call.
9
key to power it on.
key successively to adjust
key.
key or press the
key
/
key