Specifications; Troubleshooting - Kogan NBLTLSLM18A User Manual

Solar powered motion sensor led garden lamp
Table of Contents

Advertisement

SPECIFICATIONS

Power Supply
Material
Application
Solar panel
Battery
Light source
LED colour
PIR
Water resistance rating
Size (LxWxH)

TROUBLESHOOTING

If the solar light does not illuminate after movement in front of the sensor, check the
following:
• Ensure that the solar panel is in a location where it will receive maximum sunlight
during daytime hours.
• Clean the solar cells with a damp towel. Do not apply excessive pressure and avoid the
use of any solvents or cleaning agents on the solar panel.
• Ensure that the switch is in the correct position.
• Allow the panel to charge in direct sunlight for 2 days to confirm that the batteries are
fully charged.
• The light is designed to switch on when it turns dark. If there are strong light sources
nearby, then the lights may be dim or not turn on at all.
Solar
ABS+PC
Garden, Yard, Park, Road, Outdoor
5.5V/1.8W
3.7V 2000mAh, 18650 Lithium battery
500 Lumens
6000K, White
120° wide angle detection, detraction range 3-6m
IP44, suitable for use in rain
29.8 × 10.5 × 4.8cm

Advertisement

Table of Contents
loading

Table of Contents