No.
Part Name
⑥
Power / Set Button
⑦
"+" Button
⑧
Current Temperature
⑨
Connection Status
⑩
Preset Temperature
⑪
Temperature Unit
⑫
Probe Jack
Introduction
· Hold for three seconds to turn the device on/off.
· Press to enter the alert temperature setting.
· During the cooking process, press
cycle from Probe 1 to Probe 6.
o
· After pressing the
to increase the target alert temperature.
· Hold
to increase the value continuously.
Display the current temperature for the selected
probe.
Connected:
on
Disconnected:
flashes
While the probe senses the food reaching the
preset temperature, the device will start beeping
and the displays on the screen will keep flashing,
pressing any button to stop.
Default at °F, hold the Temperature Alarm Button
⑮
(Page 5) in the battery compartment for 3
seconds until it beeps to switch into °C. Hold again
to switch back to °F.
There are 6 probe jacks on the thermometer ( 4
probes are included, extra probes can be
purchased separately ).
04
to
Set Button, press