If this device is not in use for a long period of time, please remove its battery to prevent ● corrosion. Specifications Model MT04 Material ABS, Food-grade Stainless Steel Measurement Range -22°F to 572°F / -30°C to 300°C Alert Temperature Range -22°F to 572°F / -30 °C to 300°C...
Parts ① ② ③ ⑧ ④ ⑨ ⑩ ⑪ ⑤ ⑥ ⑦ ⑫ Part Name Introduction ① LCD Display Screen Displays the setting status and temperatures. ② Probe Channel Number To check each of the 6 probes’s status. The temperature alarm is on by default. You can turn off the temperature alarm by ⑮...
Page 6
Part Name Introduction · Hold for three seconds to turn the device on/off. ⑥ Power / Set Button · Press to enter the alert temperature setting. · During the cooking process, press cycle from Probe 1 to Probe 6. ⑦ ·...
Page 7
⑬ ⑭ ⑮ ⑯ ⑬ ⑬ ⑰ Part Name Introduction ⑬ To attach the device on the refrigerator or Built-in Magnet other metal surfaces. ⑭ To protect the batteries and the Temperature ⑮. Battery Lid Alarm Button · Press to turn on/off the temperature alarm. ⑮...
Instructions of the Device Note: Before using, please install the batteries (included) in the battery compartment of the device. ● When there is no operation on the buttons for 10 seconds, the backlight of the device will ● automatically turn off to enter Low Power Mode. 1) Power on/off Press and hold the Power/Set Button ...
Instruction of the App App Installation & Connection You can set and check the temperature with the SmartLife App. Please download it from the App Store for IOS or Google Play Store for Android. You can scan the QR code here: 1.
Page 10
d. Tap "Go to add" and the connection will start to load. e. Wait for the connection to succeed.
Page 11
Note: When the device has connected with the App before, simply turn on the device and open the ● App on the phone so the device can reconnect to your phone. If you fail to connect the device with your phone, press and hold the "+" and "-" Button together ●...
Page 12
Select a type of meat and level of doneness. Current temperature Timer Tap to set the preset temperature Switch the temperature unit Home Page Note: When the probe temperature reaches the preset temperature, the device will start beeping and a reminder will pop up on the phone.
Page 13
Tap to start recording Razorri Thermometer the temperature curve. After cooking, tap"End Record"and the temperature curve will be saved to the "Record" page. Check the temperature value at a specific time. Check the temperature curve of this probe in the last hour.
Clean and Maintenance Cleaning Before using the device, clean the probe with a soapy sponge or cloth, then rinse and dry it. ● Always take your reading in the thickest part of the meat, avoiding the bones and heavy fat ●...